Liquid Injection Molding Liquid Injection Molding (LIM) of Liquid Silicone Rubber used by G & F Medical is a rapid and economical process for low to high-volume applications that produces final parts with excellent precision and repeatability.
Liquid silicone is a low viscosity (0.1mil cps to 2 mil cps) liquid at room temperature, the injection barrel is cooled, and the injection mold is heated.
A two-component LSR mix-a catalyst containing platinum and cross linker-plus, if required, color pigments and additives, are dispensed into the Liquid Injection Molding (LIM) machine barrel after the mix is homogenized through a static mixer. The homogenized mix is then injected into a heated mold. The LSR mix is vulcanized (cured) in seconds. Benefits of Liquid Injection Molding (LIM) are: - Closed process lowers the risk of contamination
- Quick cure resulting in a faster cycle compared to peroxide cured cycles
- Easy to color and flexibility with changes in pigment ratios
- Low maintenance and ease of change-over
- Common screw/barrel assembly for all LSR grades as no material shear is necessary
|
 |